|
|
Stainless Steels
Mir 50® - Non-Galling, High Strength Stainless Pump Shaft
|
 |
Advantages |
• Galling Resistance
• Heat Treated Stainless
• High Strength similar to 4340 Q&T
• NACE Approved for Sour Service
• Long lengths up to 30 Feet
• Pump Shaft Straightness Service
• Machinable |
|
• Weldable
• Formable
• Unique Chemistry
• Fatigue Resistance
• High & Low Temp.
• FDA, API-6A and NACE Approved |
|
|
| |
Typical Mechanical Properties* |
|
|
| |
• Hardness - 258/294BHN
• Tensile - 140,000 PSI
• Yield - 108,000 PSI
• Charp "V" Notch Impact - 105 @ 70F
• Elongation - 26%
• Reduction of Area - 65%
*Based on 1/2" test specimen |
|
|
|
| |
Sizes |
|
| 1/4" |
5/16" |
3/8" |
7/16 |
1/2" |
9/16" |
5/8" |
11/16" |
| 3/4" |
13/16" |
7/8" |
15/16" |
1" |
1-1/8" |
1-3/16" |
1-1/4" |
| 1-5/16" |
1-3/8" |
1-7/16" |
1-1/2" |
1-9/16" |
1-5/8" |
1-3/4" |
1-15/16" |
| 2" |
2-3/16" |
2-1/4" |
2-7/16" |
2-1/2" |
2-9/16" |
2-11/16" |
2-3/4" |
| 2-15/16" |
3" |
3-1/4" |
3-3/8" |
3-7/16" |
3-1/2" |
3-3/4" |
3-15/16" |
| 4" |
4-7/16" |
4-1/2" |
5" |
5-1/2" |
6" |
6-1/2" |
6-3/4" |
|
| |
|
| |
Availability |
| |
• 10/12 Ft R/L, 20/24 Ft R/L, Custom Cuts |
| |
|
|
| Replaces most other commercial grade stainless steels, such as 304, 316, 410, 416, 17-4 and 15-5PH. Additional information is available for machining, thermal treatment, and welding. Agency concurrence: NACE MR-01-75-97 revision, API-6A, FDA, and AMS-5763 (chemistry only). |
|
See more Stainless Steels.
View our online catalog for PDF
brochures on these and other products.
|
|
